TD Type water pump (50Hz &80Hz)
The pump is designed to be pulled out from the top when disassemble. It can be repaired without affecting the pipelines
The mechanical seal for TD200 and above is cartridge mechanical seal. Motor needn’t to be disassembled when replace mechanical seal.
Curve conditions :
Following conditions are suitable for the performance curves shown above
I. All curves are based on the measured value of motor 3 X380V, 50HZ: under the constant speed
of 2900rpm, 1450rpm or 1480rpm: 60 z: under the constant speed of 3500rpm or 1750rpm:
2. Curve tolerance in conformity with IS09906 Annex A
3. Measurement is done with 20 C air-free water, without impurities
4. The operation of pump shall refer to the performance region indicated by the thickened curve to prevent overheating due to too small flow rate or overload of motor due to too large flow rate
5. If the thickness and density of the pumped liquid is different from water, the motor power should be adjusted
Intelligent three-dimensional storage system
Silent detection system
Progressive die stamping production line
AGV automatic guided vehicle
chiller water fan coil unit for heating and cooling
Scroll open type water cooled industrial chiller
Scroll box type water cooled industrial chiller
Two-Stage Compression Condensing Unit
Fan Coil Of Air Handling Unit
Water Cooled Condensing Unit
