Stainless Shell And Tube Flooded Type Evaporator

1) High Efficiency Dry Type Evaporator for Single; 2) Double and Triple Circuits/High Efficiency Flooded Type Evaporator for Single; 3) Double and Triple CircuitsHeat exchange range: 3TR – 900TR Flooded type/ marine

Shell and Tube Spray Evaporator Supply Range:Cooling Capacity: 80~1500RT; Refrigeration Circuit: 1, 2 circuits 'Refrigerant: R134A

Standard and non-standard flooded type heat exchangers are produced according to customers requirement.

This kind of sea water shell and tube heat exchanger is widely used in marine equipments but also suitable for those system which needs to process chemical or corossive liquid.

Shell and Tube Flooded Evaporator：1) Cooling Capacity: 80~1500RT;

*Liquid sprayed from above is to form a thin film on the surface of the heat exchange tube to obtain the best heat transfer effect. *The liquid separation and deforming device is national patented. *With no superheat requirement of refrigerant vapor the evaporation temperature can be greatly increased. *Achieve 30% higher heat transfer coefficient and 35% less refrigerant charge volume than flooded evaporators. The spray type evaporator is suitable for screw, centrifugal, magnetic bearing and other types of compressor.