Air Cooled Low Temperature Ice Skating Rink Chiller Unit
Profile
-
The refrigeration system of indoor ice skating
rink usually adopts two refrigeration methods: direct expansion and indirect
cooling. Direct expansion adopts "Hstars"
brand condensing unit; indirect cooling adopts "Hstars" brand screw
type low-temperature chiller, Glycol is used as a refrigerant to form ice on
the rink.
-
Brand: H'Stars
-
Cooling capacity range: 25KW-169KW
-
Applications: Ice Rink, Cooling tunnels, food production companies.
Parameters
-
Cooling range 76kw-363kw Evaporating temperature low -45°C
-
Application area Ice rink, Chemical, cold storage
Type selection of
refrigerating mainframe
The hardness of the ice surface determines its hardness.
Generally speaking, the hardness of the ice surface at -5 degree can meet the
requirements. To meet the requirements of ice temperature -5 C, the ethylene
glycol solution in pipe of the ice field is set at -15 C.
At present, “Hstars” brand has both water cooled screw-type low
temperature water chiller and air-cooled screw-type low temperature water
chiller to be choose, also be used without the standard selection of water pump
and expansion water tank. it can work immediately at site after Connect pipe
and electricity, It can also increase the heat recovery device, make the hot
water at the same time, which will improve the economic efficiency.
Air conditioning professional requirements
for civil design
-
In the civil construction it must have good
thermal insulation measures
-
Enclosure structure should choose
insulation materials with good insulation properties and low water absorption,
and pay attention to the level of the gas barrier.
-
From the viewpoint of energy conservation
and prevention of condensation, the windows on the walls should be made of
aluminum alloy double-glazed windows.
-
Special measures to be considered in the
design of air conditioning systems.
Prevent condensation on the roof or
ceiling Common technical measures:
-
The ceiling of the ceiling is made of
aluminum sheet metal.
-
Increase the surface temperature of the
ceiling or roof.
-
Indoor set dehumidification device or
air conditioning system
Eliminating ice fog
Use the following technical measures to
eliminate ice fog
-
Reduce indoor wetness.
-
Send air to the ice.
-
A dehumidifier or an air-conditioning
unit (independent air-conditioning unit with a chiller) is installed in the
indoor rink to dehumidify the indoor air and reduce the dew point temperature
of the indoor air.