-
Basic requirements for structural design of low temperature heat exchanger
2020-09-09
Carbon steel and low-alloy steel heat exchangers (design temperature lower than -20℃), austenitic stainless steel heat exchangers (design temperature lower than -196℃) are low temperature heat exchangers, and the structural design should follow the following in principle. Material selection of low temperature heat exchanger: 1. Use temperature of plastic materials Polyvinyl chloride (PVC) -15℃~+80...
view more
-
How Does H.Stars Group Produce A High Quality Water Cooled Chiller
2020-09-18
Since H.Stars Group has been established for more than 28 years so far, some of you might wonder how H.Stars produces a high quality water cooled chiller. Below is the detailed production process with strict quality control system and 100% testing before delivery. 1. Chiller Frame welding: clean the bracket and select the appropriate welding method according to the specifications of the welding ma...
view more
-
Comparison Between Magnetic Centrifugal Chiller with Screw Chiller Difference Point and Advantage
2024-04-11
It is understood that the magnetic bearing chiller is a new type of centrifuge equipment appearing in the international market. Compare to screw chillerIts main characteristics are fast speed, low noise, energy saving, intelligent management, in line with the trend of green development, and the magnetic levitation technology is in the world's leading level. Magnetic levitation compressor . bearing...
view more
-
How to do daily maintenance for air-cooled chillers | Hstarschiller.com
2020-11-10
Air-cooled chillers, as a kind of more efficient refrigeration equipment in chiller products, are widely used in the domestic industrial market and become necessary equipment for many industrial production. At the same time, although the air-cooled chiller is equipped with multiple protection devices, these are all to prevent the failure from directly damaging the unit. If the company wants to ens...
view more
-
The Role and Characteristics of Condenser in Refrigeration System
2020-11-16
The four major components of the refrigeration system are compressor, evaporator, condenser and throttling device. The role of the condenser in the refrigeration system is mainly to cool and liquefy the gaseous refrigerant in the high temperature and high pressure state discharged from the compressor, so as to meet the requirements of the circulating use of the refrigerant in the system. The selec...
view more
-
What is a plate and shell heat exchanger | Hstarschiller.com
2020-12-07
The plate and shell heat exchanger is composed of a plate bundle composed of a plate group and a shell. It is a plasma arc welded corrugated plate group placed in the shell instead of the heat exchange tube of the original shell and tube heat exchanger. The plate group is used as the heat exchanger of the heat transfer element. The two fluid media respectively flow through the plate side and the s...
view more
-
H.Stars Screw Chiller Cools Rubber Seals and Reduces Electricity Bills
2020-12-18
In the production process of rubber and plastic seals and special rubber products, 15℃ constant temperature water is required to cool the rubber mixing process, so that the semi-finished product shape is fixed and instantly formed. If accurate low-temperature water cooling is not provided, the output and quality of the product will be seriously affected . At this time, a rubber-plastic screw chill...
view more
-
Compressor Selection of Intelligent Manufacturing | Hstarschiller.com
2021-03-11
From the perspective of design to talk about the special "intelligent" creation of H.Stars Group,which is related to compressor type selection. According to the conventional thinking, the choice of compressor type is not much difficult , small unit with scroll compressor, medium unit with screw compressor, large unit with centrifugal compressor. Why mention the compressor type choice again? Let's ...
view more
-
Tips for seasonal water chiller system shutdown in winter
2021-03-12
Introduction: Winter is coming, and the ambient temperature is about to drop below zero. This will cause great damage to the chillers, water pumps, cooling towers, terminals and other equipment. In order to ensure that chillers work normally during winter, the chiller has to survive in the low temperature environment, because it will cause a great loss to users if the unit is not maintained with p...
view more
-
Application of water chiller in concrete mixing
2021-03-26
In 2004, the Ministry of Construction issued a document that chilled water must be used in the concrete mixer projects such as subways, bridges, and dams. The chilled water varies according to the outdoor temperature across the country, and the general temperature is 2℃-7℃ . H.Stars Group has not been involved in this market before, and customers know little about chillers, so ordinary customers b...
view more
-
Energy Saving Chiller System with Heat Recovery Unit of 70℃ Hot Water
2021-04-13
The heat recovery chiller is a new type of energy recovery chiller. It has one more heat recovery device than conventional chillers，it is an economical chiller. It can produce hot water for free at the same time when making cold water. The hot water temperature can reach up to 70 degrees. It is very suitable for hotels, guesthouses and pharmaceuticals, electronic constant temperature and humidity ...
view more
-
How to select and design with industrial low temperature chiller unit
2021-04-20
Recently, when communicating with some customers, we found that we were not very clear about the type selection and system design of low temperature units. However, the low temperature chiller is a very important equipment for chemical industry, raw material pharmaceutical factory and other enterprises, and it is also the place with the largest energy consumption for such enterprises. Therefore, h...
view more
-
How to reduce the initial investment and operation cost of low-temperature chiller for chemical plants
2021-04-23
Nowadays, chemical plants always consider how to reduce the initial investment and operation cost when they need to install a low-temperature chiller system for the factory. Because low temperature refrigeration unit is a very important equipment in chemical plant, which plays an important role in safety production. The initial investment of low-temperature refrigeration unit is large, and i...
view more
-
How to measure brine concentration for the brine chiller
2021-05-21
How to measure brine concentration for the brine chiller ? Saltwater brine chillers are also one of the more commonly used refrigeration equipment. Its refrigerant is the so-called brine solution, which has a low freezing point. It is especially suitable for medium and low temperature chillers to carry cold capacity. The temperature is generally required to be controlled at 0 Below ℃, it is usuall...
view more
-
How does the chiller manufacturer guarantee the quality of the chiller
2021-06-04
Before manufacturing water chillers, chiller manufacturers will design considerations for the industry, cooling capacity, structure, etc. of a product, and consider the actual use environment to make certain optimizations when designing and assembling. . So how does the industrial water chiller manufacturer ensure the quality of the water chiller? To ensure the quality of chiller products, it is n...
view more
-
How to design a reliable artificial ice rink refrigeration system
2021-06-11
Nowadays, as the increasing economy of peoples life, more and more people are in need of ice rink . Therefore, many engineer company is worried about designing a best ice rink refrigeration system with reliability and energy efficient goal. Here are some best suggestions for you before you build an ice rink. Better take a look and it will help you save your time and money. 1. Refrigeration system ...
view more
-
Attention: Brine concentration will cause serious consequences to brine chiller
2021-06-24
Low-temperature brine chiller is also one of the more commonly used refrigeration equipment. Its refrigerant is the so-called brine solution, which has a low freezing point. It is especially suitable for medium and low temperature chillers to carry cold capacity. The temperature is generally required to be controlled below 0 ℃, which is usually used for the low temperature demand of some special p...
view more
-
What is the energy saving and cost saving cooling system for sand mill in printing ink factory
2021-07-15
The development of Chinese ink industry can be traced back to the beginning of the 20th century. Since the reform and opening up, the domestic ink market has developed rapidly, and inks have been widely used in various media such as paper, metal, glass, and plastic. In recent years, affected by the further advancement of environmental protection work, the price of some chemical raw materials has r...
view more
